Soldering Iron Tester Temperature Tester 0-600℃ BAKON BK191 LCD display

Freeshipping by China-post!

Widely used to detect the temperature of the soldering iron tip  

Specifications

SKU	SG-Thermometer-BK191
Temperature measurement range	0-600℃
Measurement accuracy	±3℃
Units of measurement	1℃
Display	LCD
Power supply	DC9V  dry battery
Battery Life	>=150H
Outside size	160*80*45MM
Weight	200G
Working environment	0-40℃ 20%-80%RH

 

 Advantage

[1]Clear digital display

[2]Easy sensor replacement

[3]Equipped with a CA sensor to accurately and quickly determine the tip temperature

[4]Special alloy coating, so that the sensor can resist corrosion and oxidation

[5]It can adapt to large temperature changes, the measuring temperature range is 0-600℃, the accuracy is ±3℃, and the accuracy is high.

Instructions for use of BK191:

(1) Open the battery slot on the back of the thermometer and insert dry batteries, which must be placed properly.

(2) Put the ring gasket into the push rod.

(3) Put the red edge of the sensor into the red terminal and the blue edge into the blue terminal. Press the push button to connect the other end to the guide post.

(4) Turn on the power switch and check the display. When the display shows normal temperature, the thermometer can be used.

(5) Stick the flux on the soldering iron tip, touch the test point with the soldering iron tip, and the temperature will be displayed within 2-3 seconds.

(6) Turn off the power when not in use.