US$
MR-J4-10A AC Servo Drive 220V 100W 1-Axis New
MR-J4-10A
Specification
|
mode name |
MR-J4-10A |
|
|
Stocked Item |
S |
|
|
Output |
Rated Voltage |
3-phase 170 VAC |
|
Rated Current (A) |
1.1 |
|
|
Main Circuit Power Supply |
Voltage/Frequency |
3-phase or 1-phase 200 VAC to 240 VAC, 50/60 Hz |
|
Rated Current (A) |
0.9 |
|
|
Permissible Voltage Fluctuation |
3-phase or 1-phase 170 VAC to 264 VAC |
|
|
Permissible Frequency Fluctuation |
±5% maximum |
|
|
Control Circuit Power Supply |
Voltage/Frequency |
1-phase 200 VAC to 240 VAC, 50/60 Hz |
|
Rated Current (A) |
0.2 |
|
|
Permissible Voltage Fluctuation |
1-phase 170 VAC to 264 VAC |
|
|
Permissible Frequency Fluctuation |
±5% maximum |
|
|
Power Consumption (W) |
30 |
|
|
Interface Power Supply |
24 VDC ±10% (required current capacity: 0.5 A (including CN8 connector signal)) |
|
|
Load-Side Encoder Interface |
Mitsubishi high-speed serial communication |
|
|
Tolerable Regenerative Power of the Built-in Regenerative Resistor(W) |
- |
|
|
Control Method |
Sine-wave PWM control/current control method |
|
|
Dynamic Brake |
Built-in |
|
|
Protective Functions |
Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, under-voltage protection, instantaneous power failure protection, over-speed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection |
|
|
Position Control Mode |
Maximum Input Pulse Frequency |
4 Mpps (when using differential receiver), 200 kpps (when using open-collector) |
|
Positioning Feedback Pulse |
Encoder resolution: 22 bits |
|
|
Command Pulse Multiplying Factor |
Electronic gear A/B multiple, A: 1 to 16777216, B: 1 to 16777216, 1/10 < A/B < 4000 |
|
|
Positioning Complete Width Setting |
0 pulse to ±65535 pulses (command pulse unit) |
|
|
Error Excessive |
±3 rotations |
|
|
Torque Limit |
Set by parameters or external analog input (0 V DC to +10 V DC/maximum torque) |
|
|
Speed Control Mode |
Speed Control Range |
Analog speed command 1:2000, internal speed command 1:5000 |
|
Analog Speed Command Input |
0 V DC to ±10 V DC/rated speed (Speed at 10 V is changeable with |
|
|
Speed Fluctuation Rate |
±0.01% maximum (load fluctuation 0% to 100%), 0% (power fluctuation: ±10%) ±0.2%maximum(ambient temperature 25 ± 10centigrade degree) only when using analog speed command |
|
|
Torque Limit |
Set by parameters or external analog input (0 V DC to +10 V DC/maximum torque) |
|
|
Torque Control Mode |
Analog Torque Command Input |
0 V DC to ±8 V DC/maximum torque (input impedance: 10 kohm to 12 kohm) |
|
Speed Limit |
Set by parameters or external analog input (0 V DC to ± 10 V DC/rated speed) |
|
|
Fully Closed Loop Control |
Available in the future |
|
|
Safety Function |
STO (IEC/EN 61800-5-2) |
|
|
Communication Function |
USB: Connect a personal computer (MR Configurator2 compatible) |
|
|
Structure (IP Rating) |
Natural cooling, open (IP20) |
|
|
Close Mounting |
Possible |
|
|
Weight (kg) |
0.8 |
|
Other hot items of Mitsubishi servo amplifier for above applications:
|
MR-J4-10A |
MR-J4-60A AC Servo Drive 220V 600W 1-Axis New |
|
|
MR-J4-20A |
MR-J4-20A AC Servo Drive 220V 200W 1-Axis New |
.png "buy now(2).png"){kind=small} |
|
MR-J4-40A |
MR-J4-40A AC Servo Drive 220V 400W 1-Axis New |
|
|
MR-J4-60A |
MR-J4-60A AC Servo Drive 220V 600W 1-Axis New |
|
|
MR-J4-70A |
MR-J4-70A AC Servo Drive 220V 750W 1-Axis New |
|
|
MR-J4-100A |
MR-J4-100A AC Servo Drive 220V 1KW 1-Axis New |
|
|
MR-J4-200A |
MR-J4-200A AC Servo Drive 220V 2KW 1-Axis New |
|
|
MR-J4-350A |
MR-J4-350A AC Servo Drive 220V 3.5KW 1-Axis New |
|
|
MR-J4-500A |
MR-J4-500A AC Servo Drive 220V 5KW 1-Axis New |
|
|
MR-J4-700A |
MR-J4-700A AC Servo Drive 220V 7KW 1-Axis New |
|
Shipment:.png "shippment(56).png")
1. Usually we will ship the items within 3 working days after the payment is reached.
2. DHL, UPS, Fedex, or EMS is available for shipping.
4. Delivery time:
DHL, UPS, Fedex, EMS express shipping usually take 3-10 working days depends on the country delivered to.
4. Please check out your ADDRESS carefully when processing order.
5. Buyers please note: Accessories tariffs must be buyers to pay.The buyer can choose EMS express to avoid tariffs.
6. Any accidents, delays or other issues are the responsibility of the shipping service.
We promise to:
Provide 24/7 customer support.
Offer our customers the low Chinese price.
Streamline the buying and paying process.
Deliver goods to our customers all over the world with speed and precision.
Ensure the excellent quality of our products.
Help you find products and manufacturers in China.
Return Policy:
We accept 14 days return policy. If you want to return the item, please contact us in 14 days first and make sure the package is un-opened. The buyer has to pay for the go and back delivery cost and the custom fee of each country. Once we received the product and checked, we will make refund for the part in 24 hours.
Any quality problem in normal use during the warranty period, we will repair for free. The buyer should pay the return cost and our company will pay the re-shipping cost.
.png "about-us(9).png")
Fasttobuy dedicated PLC, inverter,touch screen, stepper servo systems integration technology development and application. We can provide Mitsubishi, Siemens, Panasonic, Yaskawa , Delta , Weiteck and other mainstream devices , while providing technical training services, you get more than just the best quality products , but also is an excellent technical service and raise the level of mechanical technology .
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact us. Our customer representative will get back shortly.
Copyright © 2011-2025 FastToBuy.com - Industrial Automation Online Store. All Rights Reserved.
NOTE: Stock and Availability shown on this site is for your reference only. While we strive to provide the most accurate and timely stock and availability information, availability information may become out of date and may change between the time you added an item to cart and the time your order is received. Quantities on clearance items are limited. Prices are current at time of posting. FastToBuy Industrial Automation Online Store Reserves the right to change prices at any time without notice.