Cooling Fan DC12V 40*40*10mm 3Pin Heatsink 6000RPM for DIY Cooling Ventilation Exhaust Projects

Cooling Fan DC12V 40*40*10mm 3Pin Heatsink 6000RPM for DIY Cooling Ventilation Exhaust Projects

Our fans are industrial grade fans available to anyone in need.

 You can confidently use them to improve your machine working conditions, for our products are all  UL CE TUV CCC Rohs tested and certified.

 It can be widely used in a variety of daily or high-end equipment. Its application includes and not limited to power converter,video servo,

machine tool CNC system, network equipment, automotive, and a wide range of heat exchangers and many more heat and cooling equipment.

Remarking

To guarantee safety and best working performance, pls kindly note below info.

A.  For your safety, please don’t touch the blade with your fingers when the fan is running.

B.  B. In case of changes of the specification specified on this document. A written notice is requested in advance.

C. Please do not touch the impeller with the pressure and never bring the fan with lead wire. The bearing and lead wire may be damaged.

D. No guarantee on the products against the safety problem or failure caused by powder dust, drop of water or insect.

E. If there is any data or related documentation different from this data sheet. This data sheet is the principle reference.

F. Please do not use the fan in the environment of corrosive gas or liquid or any detrimental gas.

G. During the installation of the fan, please pay substantial attention to possible notice caused by resonance vibration and shock.

H. It is very important to notify that avoid to drop from 60cm height when in any movement or operation, it will impact the balance of blade. Especially ball bearing structure is avoided to drop down.

I. The torque of the screw which locked the frame should not exceed 4 Kgf.

J. We will not guarantee the products if the application of our products are exceeded the limitation which is specified on this specification.