CNC Singles Axis TB6600 Stepper Motor Driver 4A 9-42VDC NEMA 17/23 Stepper Motor Driver for CNC Engraving Machines

CNC Singles Axis TB6600 Stepper Motor Driver 4A 9-42VDC NEMA 17/23 Stepper Motor Driver for CNC Engraving Machines

Easy to install with small size

H bridge bipolar constant current drive  with  9-42VDC power supply

Very stable to use, strong anti-interference ability with Opto-coupler isolated signal input model

6 types of sub-modes available with max 32 segment option

Energy saving with automatically halved current at rest

Very safe and stable  to use with built-in overheating, over current protection

Providing offline hold function with  under voltage lockout protection

Can be  used under relatively demanding environment with Semi-closed chassis

Can be widely used to drive 4, 6 and 8 Lead two-phase, four-phase stepper motor

Signal input: single ended, pulse / direction

Subdivision optional: 1/2/4/8/16/32 subdivision

 Output current: 0.5A-4.0A

 Input voltage: 9-42VDC  (works best for 12V-30V)

 The current is automatically halved at rest.

Operating Temperature: -10 to 45 Degrees Celsius

Storage temperature: -40 to 70 Degrees Celsius

Chopping Frequency: less than 50 KHZ

IC Parameter

single chip bipolar sine microstep stepper motor driver
the new BiCD 0.13 nm process
up to 42V
resistance (a +) = 0.4
?the forward and reverse rotation control
5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32)
output current: IOUT = 4.0A (peak, in 100ms)
rated output: IOUT = 3.5 A
package: HZIP25 - 1.00F
input port internal pull-down resistor: 100 K
alarm output pin current:Ialert = 1mA
monitoring output pin (MO): Imo= 1mA
with reset and enable pin
with standby function
Break through the traditional, single power supply
built in overheating protection (TSD) circuit
Undervoltage protection, built-in (UVLO) circuit
built-in overcurrent detection (ISD), circuit