US$
.jpg "fasttobuy logo(500).jpg")
Contact US:
If you have any questions, please don't hesitate to contact us.
Email: service@fasttobuy.com
skype: fasttobuy02
our working time: EST 9:00AM ~ 6:00 PM
Model: ASD-B2-0721-B+ECMA-G21306SS
Package Content:
1* 600W AC servo Motor
1* 750W AC Servo Drive
1* 3M Encoder Cable &Motor Cable
Product feature:
1.Capacity range: 0.1kW~3kW
2 . Input voltage: AC 200V~230V,single-phase/three-phase or three-phase input.
3 . Location /Speed/Torque control mode.
4 .Encode resolution is 17 bit(160000 ppr).
5. High speed pulse input (4MPPS).
6 .Support Modbus communication protocol(communication port: RS-485 / RS-422 / RS-232)
7 .The realization of high precision positioning control:
1)ASDA-B2 series support 17bit (160000 ppr) high resolution encode, satisfy the need of machine and equipment’s high resolution location control and Smooth running at low speed.
2)With three sets of automatic resonance suppression filter, effectively restrain the vibration of agency action, so it run more smoothly and more complete.
8 .Simple operation, saving cost:
1) Power cable and encode cable shared with the ASDA-B series, and match the ECMA series motor with the same size. It’s easy for the original customers directly upgraded to ASDA - B2 series.
2) Panel control operation, can be directly set on the drive
3) Screw type wiring board design, does not need additional plug connector, saving time and saves cost.
4) Built-in retrogradation resistance (more than 400 w), do not take a wiring space.
Application:
Machining center tool storage control, Dividing assembly system, sealing machine, the shear machine, feeder, lathe, high speed winding machine, prober, cutting machine, PCB dispenser, make-up machine, filling equipment, electric discharge machine, print equipment, crochet machine, engraving machine.
Specification:
1 Motor Specifications
|
Model |
ECMA-G21306SS |
|
Product Name |
Electronic Commutation Motor |
|
Servo Type |
AC Servo |
|
Name of the Series |
B2 |
|
Rated Voltage |
220V |
|
Encoder Type |
Incremental, 17-bit |
|
Motor Frame Size |
130mm |
|
Type of Shaft Diameter and Oil Seal |
Keyway(with fixed screw holes) with Brake with Oil Seal |
|
Shaft Diameter |
S=22mm |
|
Rated Power Output |
600W |
|
Rated torque (N-m)*1 |
5.73 |
|
Max. torque (N-m) |
17.19 |
|
Rated Speed |
1000 rpm |
|
Max. speed |
2000 rpm |
|
Rated current (A) |
4.8 |
|
Max. current (A) |
14.49 |
|
Torque constant-KT (N-m/A) |
1.19 |
|
Voltage constant-KE (mV/(r/min)) |
43.8 |
|
Armature resistance (Ohm) |
0.82 |
|
Armature inductance (mH) |
11.12 |
|
Electrical time constant (ms) |
13.55 |
|
Insulation class |
Class A (UL), Class B (CE) |
|
Insulation resistance |
> 100 M ohm, DC 500 V |
|
Insulation strength |
AC 1500V, 60 sec |
|
Weight (kg) (with brake) |
8.4 Kg |
|
Max. radial shaft load (N) |
490 |
|
Max. thrust shaft load (N) |
98 |
|
Power rating (kW/s) (with brake) |
35.9 |
|
Rotor inertia (× 10-4kg.m2) (with brake) |
9.14 |
|
Mechanical constant (ms) (with brake) |
1.51 |
|
Brake holding torque [Nt-m (min)] |
10.0 |
|
Brake power consumption(at 20 centigrade degree) [W] |
19.0 |
|
Brake release time [ms (Max)] |
10 |
|
Brake pull-in time [ms (Max)] |
70 |
|
Vibration grade (μm) |
15 |
|
Operating temperature |
0~40 degree centigrade |
|
Storage temperature |
-10~80 degree centigrade |
|
Operating humidity |
20% to 90% RH (non-condensing) |
|
Storage humidity |
20% to 90% RH (non-condensing) |
|
Vibration capacity |
2.5G |
|
IP Rating |
IP65 |
|
Approvals |
CE UL |
2 Drive Specifications
|
Model |
ASD-B2-0721-B |
|||
|
Product Name |
AC SERVO Drive |
|||
|
Series |
B2 |
|||
|
Model Type |
B |
|||
|
Power Supply |
Phase / Voltage |
Three-phase: 170 ~ 255VAC, 50/60Hz ±5% Single-phase: 200 ~ 255VAC, 50/60Hz ±5% |
||
|
Continuous Output Current |
5.1Arms |
|||
|
Cooling method |
Natural Air Circulation |
|||
|
Encoder Resolution /Feedback Resolution |
17-bit (160000 p/rev) |
|||
|
Main Circuit Control |
SVPWM Control |
|||
|
Tuning Modes |
Auto/Manual |
|||
|
Dynamic Brake |
Built-in |
|||
|
Position Control Mode |
Max. Input Pulse Frequency |
Line driver: Max. 500Kpps (low speed)/Max.4Mpps(high speed) Open collector: Max. 200Kpps |
||
|
Pulse Type |
Pulse + Direction, A phase + B phase, CCW pulse + CW pulse |
|||
|
Command Source |
External pulse train |
|||
|
Smoothing Strategy |
Low-pass filter |
|||
|
Electronic Gear |
Electronic gear N/M multiple N: 1 ~ (2 26 -1)/M:1 ~ (2 31 -1) 1/50 < N/M < 25600 |
|||
|
Torque Limit Operation |
Set by parameters |
|||
|
Feed Forward Compensation |
Set by parameters |
|||
|
Speed Control Mode |
Analog Input Command |
Voltage Range |
0 ~ ±10 VDC |
|
|
Input Resistance |
10 KΩ |
|||
|
Time Constant |
2.2 us |
|||
|
Speed Control Range*1 |
1 : 5000 |
|||
|
Command Source |
External analog signal /Internal parameters |
|||
|
Smoothing Strategy |
Low-pass and S-curve filter |
|||
|
Torque Limit Operation |
Set by parameters or via Analog input |
|||
|
Responsiveness Characteristic |
Maximum 550Hz |
|||
|
Speed Fluctuation Rate *2(at rated speed) |
0.01% or less at load fluctuation 0 to 100% |
|||
|
0.01% or less at power fluctuation ±10% |
||||
|
0.01% or less at 0 to 50 degree centigrade ambient temperature fluctuation |
||||
|
Torque Control Mode |
Analog Command Input |
Voltage Range |
0 ~ ±10 VDC |
|
|
Input Resistance |
10 KΩ |
|||
|
Time Constant |
2.2 us |
|||
|
Command Source |
External analog signal / Internal parameters |
|||
|
Smoothing Strategy |
Low-pass filter |
|||
|
Speed Limit Operation |
Parameter Setting or via Analog input |
|||
|
Analog Monitor Output |
Monitor signal can set by parameters (Output voltage range: ±8 V) |
|||
Scene application
.jpg "applications-1(17).jpg")
Shipment:.png "shippment(54).png")
1. Usually we will ship the items within 3 working days after the payment is reached.
2. DHL, UPS, Fedex, or EMS is available for shipping.
3. Delivery time:DHL, UPS, Fedex, EMS express shipping usually take 3-10 working days depends on the country delivered to.
4. Please check out your ADDRESS carefully when processing order.
5. Buyers please note: Accessories tariffs must be buyers to pay.The buyer can choose EMS express to avoid tariffs.
6. Any accidents, delays or other issues are the responsibility of the shipping service.
We promise to:
Offer our customers the low Chinese price.
Streamline the buying and paying process.
Deliver goods to our customers all over the world with speed and precision.
Ensure the excellent quality of our products.
Help you find products and manufacturers in China.
Return Policy:
We accept 14 days return policy. If you want to return the item, please contact us in 14 days first and make sure the package is un-opened. The buyer has to pay for the go and back delivery cost and the custom fee of each country. Once we received the product and checked, we will make refund for the part in 24 hours.
Any quality problem in normal use during the warranty period, we will repair for free. The buyer should pay the return cost and our company will pay the re-shipping cost.
.png "about-us(8).png")
We love taking care of our customer’s retail needs. For years, It is our joy to run the best online store for our customers. As a business, we strive to make sure that we can get you your items as quickly as possible. Pricing is always set to be as low as possible so you can enjoy your purchase at the greatest discount. In any event, if you wish to communicate with us, we are here to take care of you and communicate back within a 24-hour time frame. If you are looking for something different or a variation of a product, send us a message and we can check on it for you.
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact us. Our customer representative will get back shortly.
Copyright © 2011-2025 FastToBuy.com - Industrial Automation Online Store. All Rights Reserved.
NOTE: Stock and Availability shown on this site is for your reference only. While we strive to provide the most accurate and timely stock and availability information, availability information may become out of date and may change between the time you added an item to cart and the time your order is received. Quantities on clearance items are limited. Prices are current at time of posting. FastToBuy Industrial Automation Online Store Reserves the right to change prices at any time without notice.