US$
Ratio1:10 NEMA34 6A 12NM 1714oz-in L 156mm Gear Reduction Motor+Drive CNC Router 86HS15660A4G10+MA860H
Appliaction:
Inject printers, Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, engraving machine, packaging machinery, CNC numerically-controlled machine tool and transmission.
Motor Product Description:
Step Angle Accuracy: ±5%(full step, no load)
Resistance Accuracy: ±10%
Inductance Accuracy: ±20%
Temperature Rise: 80 Degrees Celsius Max.(rated current,2 phase on)
Ambient Temperature: -20°C-+50°C
Insulation Resistance: 100MΩ Min.500V DC
Dielectric Strength: 500V AC for one minute
There are multiple choice for 86BYG series geared motor. if you any other choice, please please do contact us for a better solution.
Motor Length: 66mm 80mm 98mm 114mm 126mm 156mm
Gear Ratio: 1:3 1:5 1:7.5 1:10 1:12.5 1:15 1:20 1:25 1:30 1:40 1:50 1:75 1:150 1:180
Reduction box: 90*90*45mm(Gear Ratio<20)
Reduction box: 90*90*60mm(Gear Ratio>=20)
Gear Reduction Motor Specifications
|
Model |
Step Angle |
Rated Current (A) |
Phase Resistance (ohm) |
Phase Inductance (mH) |
Holding Torque (N*m) |
Detent Torque (N*cm) |
Rotor Inertia (g*cm2) |
Motor Length (mm) |
|
86HS6640A4 |
1.8 |
4 |
0.6 |
1.6 |
3 |
5.5 |
850 |
66 |
|
86HS8040A4 |
1.8 |
4 |
0.75 |
5.6 |
4 |
6.5 |
1050 |
80 |
|
86HS9860A4 |
1.8 |
6 |
0.33 |
2.4 |
6.5 |
9.5 |
1550 |
98 |
|
86HS11460A4 |
1.8 |
6 |
0.5 |
2.1 |
8.2 |
12.5 |
1800 |
114 |
|
86HS12660A4 |
1.8 |
6 |
0.65 |
3.5 |
9.5 |
18.5 |
2200 |
126 |
Stepper Drive Specifications
|
Item |
Min |
Typical |
Max |
Unit |
|
Power supply |
24 |
- |
110 |
VDC |
|
18 |
|
80 |
VAC |
|
|
Average output current |
2 |
2.5 |
7.8 |
A |
|
Logic input current |
6 |
15 |
30 |
mA |
|
Impulse response frequency |
- |
- |
100 |
KHZ |
|
Pulse low level |
5 |
- |
1 |
μS |
Drive Wiring Description
|
Signal |
Function |
|
PUL |
Pulse signal: rising edge, the pulse from low to high is to go a step angle motor |
|
DIR |
Direction signal: TTL-level driver to change the direction |
|
OPTO |
Optocoupler drive power |
|
ENA |
Enable signal: block or allow the drive to work, low-level ban |
|
GND |
DC power supply ground |
|
+V |
DC power supply positive (typical 24VDC) |
|
A+ |
Motor Phase A |
|
A- |
Motor Phase A |
|
B+ |
Motor Phase B |
|
B- |
Motor Phase B |
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact us. Our customer representative will get back shortly.
Copyright © 2011-2025 FastToBuy.com - Industrial Automation Online Store. All Rights Reserved.
NOTE: Stock and Availability shown on this site is for your reference only. While we strive to provide the most accurate and timely stock and availability information, availability information may become out of date and may change between the time you added an item to cart and the time your order is received. Quantities on clearance items are limited. Prices are current at time of posting. FastToBuy Industrial Automation Online Store Reserves the right to change prices at any time without notice.