DVP32SM11N Delta PLC 32DI Latched Connector Digital Module Original brand new
Introduction
Thank you for choosing Delta DVP-Slim series programmable logic controller. DVP-Slim series pin-headed digital I/O extension unit offers 32 points. For DVP-SS/SA/SX/SC series MPU, the maximum digital I/O extension points (including the MPU) can reach 128 points. For SV series MPU, the maximum digial I/O extension points (including the MPU) can reach 256 points. In addition, maximum 8 additional special modules (AD/DA/PT/TC/XA/PU) can be extended to DVP-Slim series extension unit.
Electrical Specification
Model Item |
DVP32SM11N |
DVP32SN11TN |
Power supply voltage |
24V DC (-15% ~ 20%) (with DC input polarity reverse protection) |
|
Motion specification |
Within 5ms of the momentary power loss, the device will keep on operating. |
|
Power consumption |
1W |
1.5W |
Insulation resistance |
>5 Mohm (all I/O point-to-ground: 500V DC) |
|
Noise immunity |
ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV, Analog & Communication I/O: 1KV Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m |
|
Earth |
The diameter of grounding wire shall not be less than that of L, N terminal of the power. (When many PLCs are in use at the same time, please make sure every PLC Is properly grounded.) |
|
Operation/storage environment |
Operation: 0ºC ~ 55ºC (temperature); 50 ~ 95% (humidity); pollution degree 2 Storage: -40ºC ~ 70ºC (temperature); 5 ~ 95% (humidity) |
|
Shock/vibration immunity |
International standards: IEC1131-2, IEC 68-2-6 (TEST Fc)/IEC1131-2 & IEC 68-2-27 (TEST Ea) |
|
Weight (g) |
70g |
70g |
Model explanation
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact us. Our customer representative will get back shortly.