



DVP20PM00DT Delta PLC 100-240VAC DI8 DO8 Motion controller Original brand new
Features
The advanced PM series motion control MPU can become the motion extension module of another PM series MPU, very flexible in all kinds of applications.
Specifications
*MPU points: 16
*Max. I/O points: 512
*Program capacity: 64K Steps
*Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
*Data register: 10,000 words (latched)
*500KHz high-speed pulse output:
Built-in 2 groups of A/B phase differential signal ouput
X-axis pulse output: (FP0+, FP0-), (RP0+, RP0-)
Y-axis pulse output: (FP1+, FP1-), (RP1+, RP1-)
*Supports Manual Pulse Generator (MPG) and multi-point external signal inputs
Power supply voltage |
100 to 240 VAC (-15 to 10%), 50/60Hz ± 5% |
Fuse capacity |
2A/250 VAC |
Power consumption |
60 VA |
DC24V current output |
500 mA |
Power protection |
DC24V; output short-circuited |
Withstand voltage |
1,500 VAC (Primary-secondary); 1,500 VAC (Primary-PE); 500 VAC (Secondary-PE) |
Insulation impedance |
> 5M Ohm (all I/O point-to-ground 500 VDC) |
Noise immunity |
ESD: 8 kV Air Discharge, EFT: Power Line: 2 kV, Digital I/O: 1 kV, Analog & Communication I/O: 250 V |
Grounding |
The diameter of grounding wire shall not be less than that of L, N terminal of the power. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
Operation/storage |
Operation: 0 to 55°C (temperature), 50 to 95% (humidity), pollution degree 2 Storage: -25 to 70°C (temperature), 5 to 95% (humidity) |
Vibration/shock immunity |
International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea) |
Weight (g) |
696 |
Applications
Used for 2-axis servo positioning control, material cutting machine (high-speed servo control), crane operations, material clipper controlled by the servo.
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact us. Our customer representative will get back shortly.