DVPDT01-S Delta PLC DeviceNet slave communication module Original brand new
PRODUCT INTRODUCTION
• Support Group 2 only servers.
• Support explicit connection via Predefined Master/Slave Connection Set. (Explicit message)
• Support Polling connection.
• Connection size is fixed to 4bytes input and 4bytes output.
• Support EDS file configure in DeviceNet configuration tools.
Specification
DeviceNet Connection
Interface |
Pluggable connector (5.08mm) |
Transfer method |
CAN |
Transfer cable |
2-wire twisted shielded cable with 2-wrie bus power cable and drain |
Electrical isolation |
500V DC |
Communications
Message types |
I/O Polling |
Explicit |
|
Baud Rates |
125 K bps |
250 K bps |
|
500 K bps |
|
Product Code |
80 |
Product Type |
12 |
Vendor ID |
799 (Delta Electronics Inc.) |
Electrical Specification
DeviceNet |
Module supply voltage: All other power derived from PLC controller power supply |
Network input current: less than 50mA (24V DC) |
Environmental Specifications
Noise Immunity |
ESD(IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge EFT(IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV, Analog & Communication I/O: 1KV Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV RS(IEC 61131-2, IEC 61000-4-3): 26MHz~1GHz, 10V/m |
Environment |
Operation: 00C~550C (Temperature), 50~95% (Humidity), Pollution degree 2; Storage: -400C~700C (Temperature), 5~95% (Humidity) |
Vibration / Shock Resistance |
Standard: IEC1131-2, IEC 68-2-6(TEST Fc)/ IEC1131-2 & IEC 68-2-27 (TEST Ea) |
Standard |
IEC 61131-2,UL508 standard |
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact us. Our customer representative will get back shortly.