Delta PLC ES2 series analog Module DVP04PT-E2 4AI 16 bit PID-inside New

item ID#: DVP04PT-E2
Item condition: New and Original
No reviews Write a review
Weight: 1 Kg(s)
6 available/ 0 sold
Start from: 1 Unit(s)
Manufactured by: Delta
Wholesale Price: 136.00
Quantity: Unit(s)
  • DHL Recommended Shipping
  • Stock Lead Time

Estimate Shipping Costs

  • Description
  • Download
  • Reviews
  • Write a Review

Delta PLC ES2 series analog Module DVP04PT-E2 4AI 16 bit PID-inside New


fasttobuy logo(466).jpg

 

Contact US:

If you have any questions, please don't hesitate to contact us.

Email: service@fasttobuy.com  
skype: fasttobuy02
our working time: EST 9:00AM ~ 6:00 PM

All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-send email and we will reply to you as soon as possible.

 

Introduction:

 

DVP04PT-E2 temperature measurement module receives 4 points of platinum temperature sensors (PT100 3-WIRE 100Ω 3850 PPM/°C (DIN 43760 JIS C1604-1989)/ NI100 / PT1000 / NI1000) and converts them into 16-bit digital signals. Users can select the temperature to be displayed in Celsius (°C) or Fahrenheit (°F). Resolution of temperature in Celsius: 0.1°C and in Fahrenheit: 0.1°F. In addition, you can access the data in the module by applying FROM/TO instructions or read the average value of channels directly by using MOV instruction (Please refer to allocation of special registers D9900 ~ D9999).

 

Specifications:


*MPU points: 16 / 20 / 24 / 32 / 40 / 60
*Program capacity: 16k steps
*Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
*Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
*DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution.
*Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
*New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
*Application in emerging industry: Exclusive instructions and function blocks designed for PV solar tracker
*Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta's AC motor drives
*Password protection: Password for subroutine, user ID, restriction on trial times
*Highly efficient instruction efficient instruction execution 

 

 

Update 200 I/O extension points

LD instruction

MOV instruction

DMUL instruction

DEMUL instruction

ES2

1ms

0.54us

3.4us

11.4us

10.3us

ES

6ms

3.8us

18us

150us

55.4us

Note

Update I/O extension module

Basic instruction

16-bit data movement instruction

31-bit multiplication instruction

32-bit floating point multiplication

 

Model

Item

16ES2

00_ 

24ES2

00_ 

32ES2

00_ 

40ES2

00_ 

60ES2

00_ 

20EX2

00_ 

32ES2

11T 

Power supply

voltage 

100 ~ 240VAC (-15% ~ 10%), 50/60Hz + - 5%

24VDC

(-15~+20%)

Connector 

European standard removable terminal block (Pin pitch: 5mm)

Operation 

ES

200 

DVP-ES2 starts to run when the power rises to 95 ~ 100VAC and stops

when the power drops to 70VAC. If the power is suddenly cut off, the MPU will continue running for 10ms.

ES

211 

DVP-ES2 starts to run when the power rises to 20.4VDC~28.8VDC and

stops when the power drops to 17.5VDC. If the power is suddenly cut off,

the MPU will continue running for 10ms.

Power supply fuse

2A/250VAC

2.5A / 30VDC,

Polyswitch

Power consumption

30VA

 

DC24V current output

500mA

/

Power supply protection

DC24V output short circuit protection

/

Voltage withstand

1,500VAC (Primary-secondary), 1,500VAC (Primary-PE),

500VAC (Secondary-PE)

Insulation resistance

> 5M Ohm at 500VDC (between all I/O points and ground)

Noise immunity 

ESD: 8KV Air Discharge

EFT: Power Line: 2KV, Digital I/O: 1KV, Analog & Communication I/O: 1KV

RS: 26MHz ~ 1GHz, 10V/m

Grounding 

The diameter of grounding wire shall not be less than that of L, N terminal of

the power supply. (When many PLCs are in use at the same time, please

make sure every PLC is properly grounded.)

Environment 

Operation: 0°C~55°C (temperature), 50~95% (humidity), pollution degree 2

Storage: -25°C~70°C (temperature), 5~95% (humidity)

Agency approvals

UL508

European community EMC Directive 89/336/EEC and Low Voltage Directive

73/23/EEC

Vibration/shock immunity

International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 &

IEC 68-2-27 (TEST Ea)

Weight (g) 

R

377

414

489

554

696

462

/

T

351

387

432

498

614

442

321

 

Applications

HVAC, molding injection machine, big storage management, packaging machine, precise textile machine, logistic system

 

Shipment:

shippment(17).png
1. Usually we will ship the items within 3 working days after the payment is reached.
2. DHL, UPS, Fedex, or EMS is available for shipping.
4. Delivery time:
DHL, UPS, Fedex, EMS express shipping usually take 3-10 working days depends on the country delivered to.
4. Please check out your ADDRESS carefully when processing order.
5. Buyers please note: Accessories tariffs must be buyers to pay.The buyer can choose EMS express to avoid tariffs.
6. Any accidents, delays or other issues are the responsibility of the shipping service.

We promise to:

    Provide 24/7 customer support.
    Offer our customers the low Chinese price.
    Streamline the buying and paying process.
    Deliver goods to our customers all over the world with speed and precision.
    Ensure the excellent quality of our products.
    Help you find products and manufacturers in China.

Return Policy:

    We accept 14 days return policy. If you want to return the item, please contact us in 14 days first and make sure the package is un-opened. The buyer has to pay for the go and back delivery cost and the custom fee of each country. Once we received the product and checked, we will make refund for the part in 24 hours.
    Any quality problem in normal use during the warranty period, we will repair for free. The buyer should pay the return cost and our company will pay the re-shipping cost.

company(105).png

Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

Have any question or inquire for this item? Please contact us. Our customer representative will get back shortly.

Related Categories