12NM Nema 34 DSP Closed Loop Stepper Drive Motor AC60V for CNC Engraving HBS860H+86HBS120
We can offer: cables of different length, AC/DC power supplies, reducers and many other parts for this kit. If you have any questions, pls contact with us by:
Email: service@fasttobuy.com
Phone: +86-755-82546545 Ext. 809 (English service)
1. Advantages
HBS860H uses the latest special motor control chip DSP and vector loop control technology, completely overcome the open-loop stepper motor lose step problem, and significantly improve the high speed performance, reduce the heating of the motor motor and reduce vibration of the motor, enhance the machining speed and accuracy, reduce the energy consumption of the machine. When the motor is continuously overloaded, the driver will output the alarm signal in time, which has the same reliability as the AC servo system. It is convenient to upgrade the traditional step system, and the cost is only 50% of the AC servo system.
The simple servo is compared with the traditional step motor:
1. will not be lost step phenomenon, can ensure the precise positioning of the motor;
2. high speed performance is raised about 30%, and the working speed of equipment is improved.
When the 3. motor is working normally, the heat drop is reduced by about 20%, and the torque of the motor is reduced.
The vibration of the 4. motor is obviously reduced and the operation is more stable.
5. use variable current control technology to save energy consumption.
The simple servo is compared with the traditional AC servo product:
1. parameter is easy to adjust.
2. high speed stop does not shake, and the zero speed customization is stable.
3. position response is very fast, especially suitable for the application of short distance quick start and stop occasions.
4. the cost is reduced by more than 50%.
2.Contrast
Servo motor |
Stepper motor |
Closed loop stepper motor |
can't be absolutely static |
the risk of losing the step, after the loss of the control system does not know, as usual pulse, in fact, the machine has been out of control.
|
at rest is absolutely still. |
overshoot |
will not overshoot |
|
debugging complex |
debug and use is very simple |
|
at low speed, the operation of the servo motor will be peristaltic or called crawling |
the real sinusoidal wave, vector and filter are used to control the current, and the operation is very smooth. |
1. Shipping listing
1 PCS Drive |
HBS860H |
1 PCS Motor |
86HBS120 |
1 PCS Encoder Cable |
3M |
2. Drive functional characteristics
Model |
HBS860H |
|||
Type |
DSP Closed loop stepper drive |
|||
maximum peak current |
8A |
|||
Impulse response frequency |
200KHz |
|||
Micro-stepping driver |
200~51200ppr |
|||
Voltage |
20~80VAC/DC30-110V |
|||
Protective function |
Over voltage, over current, tracking error, overproof |
|||
Signal input |
Support PUL/DIR and CW/CCW modes (difference) Compatible 5~24V signal (Don't need a resistor) |
|||
Advantage |
no step to lose, Low noise, little vibration and high efficiency, low heat |
|||
Continuous overload |
Output an alarm signal |
|||
Type of cooling |
Air-cooling |
|||
|
Min |
Typical |
Max |
Unit |
Output Current |
- |
- |
8 |
A |
Input Voltage |
20 |
70 |
75 |
VAC |
30 |
|
110V |
VDC |
|
Logic Signal Current |
7 |
10 |
16 |
mA |
Pulse input frequency |
- |
200 |
- |
kHz |
Isolation Voltage |
500 |
|
|
Mohm |
3.Motor electric parameter
Model |
86HBS120 |
Step angle/phase |
1.8 degree 2ph |
Rated voltage/current |
3.92V/5.6A |
resistance |
0.7ohm |
Inductance |
6mH |
Hold torque |
12NM |
Rated Speed |
1000RPM |
Encoder |
1000line |
Class of insulation |
B |
Rotor inertia |
4500 g.cm2 |
4. Appications
desktop CNC routers, small CNC mills, laser cutters / engravers, dental mills, electronic assembly & inspection equipments, labeling equipments, pick & place machines, X-Y tables, scientific instruments... Especially for short-distance, short-time, fast start-stop and zero-speed stable stop.
Shipment:
1. Usually we will ship the items within 3 working days after the payment is reached.
2. DHL, UPS, Fedex, or EMS is available for shipping.
4. Delivery time:
DHL, UPS, Fedex, EMS express shipping usually take 3-10 working days depends on the country delivered to.
4. Please check out your ADDRESS carefully when processing order.
5. Buyers please note: Accessories tariffs must be buyers to pay.The buyer can choose EMS express to avoid tariffs.
6. Any accidents, delays or other issues are the responsibility of the shipping service.
We promise to:
Provide 24/7 customer support.
Offer our customers the low Chinese price.
Streamline the buying and paying process.
Deliver goods to our customers all over the world with speed and precision.
Ensure the excellent quality of our products.
Help you find products and manufacturers in China.
Return Policy:
We accept 14 days return policy. If you want to return the item, please contact us in 14 days first and make sure the package is un-opened. The buyer has to pay for the go and back delivery cost and the custom fee of each country. Once we received the product and checked, we will make refund for the part in 24 hours.
Any quality problem in normal use during the warranty period, we will repair for free. The buyer should pay the return cost and our company will pay the re-shipping cost.
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact us. Our customer representative will get back shortly.